Wednesday 31 July 2019

Pedigree Fungicide SC Now Available In CA

Pedigree™ Fungicide SC

PBI-Gordon Corporation has announced that Pedigree™ Fungicide SC has received registration from the State of California and is now approved for use in California.Pedigree Fungicide SC

Pedigree is formulated to provide control of brown patch, fairy ring, leaf and sheath spot, large patch, red thread, pink patch, yellow patch, southern blight, and gray snow mold.

Labeled for use on golf courses, sports fields, and residential and commercial properties, Pedigree is a flowable suspension concentrate. It has shown safe and consistent performance on creeping bentgrass, Kentucky bluegrass, annual bluegrass, annual and perennial ryegrass, red fescue, tall fescue, Bermudagrass, zoysiagrass, and St. Augustinegrass.

Marketed through a partnership with Nichino America, Pedigree features a proprietary formulation and the active ingredient flutolanil.

 

The post Pedigree Fungicide SC Now Available In CA appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2MpRr1r
via IFTTT

National Avocado Day Tree Planting Tips

National Avocado Day

It’s National Avocado Day! Celebrate by planting an avocado tree at a customer property! While locations in frost zones are restricted to featuring these tropical trees in containers, sites where temperatures rarely drop to freezing–such as the southernmost regions of Florida, Texas, Arizona or California–may find these trees a beneficial and attractive addition to the landscape. After all, clients who haven’t indulged the toothpick- in-the-pit-trick have probably at least gobbled up guacamole! So how do you plant and care for avocado trees?

According to information from the Pennington Seed Inc. website, plant avocados in the spring so the tree becomes established well before cooler winter months arrive. Choose a site with full sun and excellent drainage, protected from winds and frost. Allow plenty of room for the tree’s mature size, since they can grow 40 feet tall or more in the ground. Avocados have shallow roots, so plant them at, or slightly higher than, the level they grew at in their pot and avoid planting too deep.
Once established, avocados are simple to maintain, states the Pennington Seed site. Their large, leathery, green leaves and attractive form make them beautiful landscape trees, even when they’re fruitless.  Water the entire area beneath the tree’s canopy deeply and thoroughly, then allow the soil to dry out slightly before watering again. Most avocado roots stay in the top six inches of soil, which can dry out quickly. Newly planted trees may need water two to three times per week their first year, while mature avocado trees need water equal to about two inches of rainfall or irrigation each week during summer.
As to fertilizer, avocados do best with plant foods designed specifically for avocados and citrus, notes the Pennington Seed website. These prefer fertilizers with higher amounts of nitrogen relative to phosphorus and potassium. That means that the first number in the N-P-K ratio on your fertilizer label should be higher than the other two. Pennington UltraGreen Citrus & Avocado Plant Food 10-5-5 provides avocados with an ideal blend of primary nutrients plus added micronutrients, including zinc and iron, which are especially important to avocado health and growth. This premium fertilizer starts feeding immediately, then continues feeding your tree for up to four months.

As a final note, keep in mind that one essential for avocado growing success is patience. Plant a tree, and customers may wait three to four years for fruit. But the result is tasty and nutritious!

The post National Avocado Day Tree Planting Tips appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2Mt8uPZ
via IFTTT

Betting On A Winner

Horse Pastures

Every year, 20 horses bolt out of the paddocks at the Kentucky Derby, vying for the coveted rose garland. And every year, at least a third of those horses have grazed and galloped on grass mowed and maintained by Hillenmeyer Landscape Services.

“In any given year, up to half of the Derby horses have some connection with a farm we are associated with or take care of,” said Chase Hillenmeyer, president Hillenmeyer Landscape Services. “We’ve had a few winners on farms we’ve maintained.”

Hillenmeyer, a sixth-generation family commercial landscaping operation, received its first contract for equine maintenance in the 90s. “That’s the biggest thing we do today,” said Hillenmeyer. “Our niche is maintaining horse farms in central Kentucky.”

Landscapers

Hillenmeyer Leadership

With properties ranging from 400 acres to a sprawling 2,500 acres, equine maintenance is a constant job during peak season. Hillenmeyer and his crew of 275 provide two types of mowing services for horse farms: common mowing, which is conventional grass cutting with a 60-inch ZTR mower around houses, barns, and roadways; and field mowing, accomplished with a tractor and a 20-foot batwing application for mowing fields and paddocks. They also string trim fence lines, with one contract boasting 85-miles of fencing, and offer services such as mulching, edging and tree trimming.

Keeping Up In Kentucky

Keeping the fields of central Kentucky’s horse farms maintained takes quite a few lawnmowers so Hillenmeyer runs a little more than 100 units. In the past few years, though, the crew started to encounter problems with its engine manufacturer.

“We were seeing a large number of engines blowing prematurely in the 1,000 to 1,500-hour range,” said Hillenmeyer, “This caused us significant production problems, management problems, and customer problems.”

“There was a period of time… when we were constantly dealing with down equipment, retooling crews, and working with two half crews instead of a whole crew because mowers weren’t working,” said Hillenmeyer. The crew wasn’t able to complete jobs on time, and everyone was feeling the burden of unreliable equipment.

On top of the performance issues, Hillenmeyer found a lack of accountability on the engine manufacturer’s part, as well as the mower manufacturer that spec’d the engines. “You can have product failure, but you can’t have service failure — they had both,” said Hillenmeyer. So he decided to make a change.

Finding Harmony

In the past, Hillenmeyer had purchased some units spec’d with Vanguard® engines. “We looked at our fleet and saw that the engines with a Vanguard sticker on them lasted a lot longer than the ones without Vanguard stickers,” said Hillenmeyer. With that in mind and looking for alignment among his engine and mower manufacturer, Hillenmeyer and his team reached out to Briggs & Stratton to see what it could offer.

Hillenmeyer quickly discovered that Vanguard engines not only offered the performance he was looking for, but an opportunity to work with manufacturers already in harmony with one another. “The chain of alignment among the Ferris® mowers and Vanguard engine teams and our local distributor really caught our attention,” he said. “When we spoke with them, they heard our challenges with previous manufacturers who didn’t work well together and showed us how that wouldn’t be a problem if we went with Vanguard engines.”

A factory tour of the engine manufacturing facility in Auburn, AL, solidified that assertion. “We were blown away by watching the Vanguard production team and the quality controls they used. It gave us a lot of confidence,” commented Hillenmeyer.

The final selling point came down to maintenance. The BIG BLOCK™ V-Twin engine line he was eyeing to spec on the new Ferris mowers came equipped with Vanguard’s innovative Oil Guard™ system. “We saw that Oil Guard would help us reduce our time spent on oil maintenance and therefore maintenance cost,” said Hillenmeyer, “Not to mention the larger oil reservoir that offers a little more margin of error on an engine blowing.”

A New Season

Ultimately, Hillenmeyer and his team replaced 35 units — about a third of its fleet — with Ferris mowers equipped with Vanguard engines. The new engines tackled the 2017-18 season with the reliability Hillenmeyer needed. “If the mowers aren’t working, that causes pain all the way down the line. Uptime is key, and the Vanguard engines have certainly provided that,” he said.

Now, the Hillenmeyer crew is back to cutting the horse pastures of central Kentucky. And while it can’t be known if this service has anything to do with determining Derby winners, Hillenmeyer has a theory. “Let’s just say we do our job so well that the owners can focus… more attention on the horses.”

The post Betting On A Winner appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2GCTTOr
via IFTTT

Natural Turf Blend Fertilizer From Plant Nutrition Technologies

Fertilizer

Turf Blend, a new 100% natural fertilizer, has been announced by Plant Nutrition Technologies. “The turf industry needs a natural fertilizer that is robust, but free of synthetic chemicals,” Dennis Amoroso, company president said. “After several months of research and experimentation, we have developed a unique product perfectly suited for creating high- quality turf.”

Turf Blend incorporates deep-core earth, biomass and proprietary elements. The result is a bio-mineral product rich in nutrients, healthy bacteria, and fungi that helps deliver nutrients to the plant’s roots. Enzymes, bacteria and organisms all act together to assist growth.

Fertilizer

Turf Blend from Plant Nutrition Technologies

The fertilizer is easily spread on the turf’s surface and provides a growing environment that strengthens roots and creates a durable, lush surface. As a natural product, there is no chemical runoff or related reporting issues. Further, the product creates an environment that retains moisture and reduces irrigation requirements. An extensive trial of Turf Blend was successfully completed at Greenhorn Creek Resort in Angel’s Camp, CA. Plant Nutrition Technologies products, which use rock powder from deep core earth as a base, are certified 100% natural by the California Department of Food and Agriculture.

The post Natural Turf Blend Fertilizer From Plant Nutrition Technologies appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2SXSqqL
via IFTTT

Tuesday 30 July 2019

New John Deere Apprenticeship Program Approved

John Deere

A new John Deere Registered Apprenticeship Program for its Agriculture & Turf and Construction & Forestry dealers has been approved by the U.S. Department of Labor. The program provides dealers with a formalized, on-the-job and technical training plan to develop more highly skilled employees and  help address a widespread shortage of service technicians, especially in rural areas across the country.

“The new Registered Apprenticeship Program complements our existing John Deere TECH program,” says Grant Suhre, director, region 4 customer and product support for John Deere Ag & Turf. “In addition to the on-the-job training experience, an apprentice will receive technical instruction and be assigned a personal mentor as a part of the highly organized training structure. Upon completion of the apprenticeship, he or she will receive a nationally recognized journeyworker certificate.John Deere

Through participation in the program, dealers formally commit to developing additional talent in an earn-while-you-learn setting. As training progresses, apprentices are rewarded for new skills acquired. This can improve a dealer’s productivity and profit potential as employee turnover costs are reduced and employees are retained longer,” says Tim Worthington, manager, customer support for the John Deere Construction and Forestry Division. “In addition, John Deere customers benefit from access to more highly skilled dealer personnel who are servicing or supporting their equipment.”

John Deere dealers can also collaborate with any number of local organizations as part of the Registered Apprenticeship Program. These organizations include, but are not limited to: the John Deere TECH Program; K-12 schools; community colleges; labor organizations; economic development groups; foundations; and workforce development boards.

John Deere dealers who wish to participate can receive support and technical assistance from John Deere and Jobs For the Future (a U.S. Department of Labor intermediary), who will expedite the registration process with state or federal apprenticeship agencies. After registering, dealers can immediately enter employees into the Agriculture Equipment Technician or Heavy Construction Equipment Mechanic programs. They can also select other occupations for the apprentice program, including sales professionals, parts professionals, and accountants to develop appropriate work processes for those jobsNext, dealers will identify master-level employees who are capable of and willing to mentor apprentices. Finally, dealers will identify potential candidates or incumbent workers who would benefit from the apprenticeship program and enroll them.

When apprentices participate, they track and report their on-the-job learning and technical training time in conjunction with their employer. The dealer’s program administrator then inputs this data into the appropriate state or federal database. To ensure high standards are maintained, dealers are required to follow specific guidelines, developed over years of apprenticeship experience, after registration.

To simplify participation for its dealers, John Deere created national guideline standards for the Registered Apprenticeship Program and is providing technical assistance to dealers interested in participating. “These guidelines provide a consistent apprenticeship program template that any dealer can implement if they participate,” Suhre explains. Dealers can utilize these national guideline standards to have a program approved and operating in a very short timeframe.

The post New John Deere Apprenticeship Program Approved appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2ymOFSh
via IFTTT

DEWALT Announces the New 20V MAX Pole Saw

pole saw

Part of its growing 200+ 20V MAX* System, DEWALT announces the new 20V MAX* Pole Saw (DCPS620) designed for yard care and landscaping. With compatible batteries across power tools and outdoor products, users invested in the broad 20V MAX* System have a wide variety of tools and equipment they can use to get the job done.

pole saw

The 20V MAX* Pole Saw is ideal for use in applications including storm damage cleanup, brush clearing, branch pruning, shrubbery trimming, and clearing lots to ready them for construction. The pole saw’s 10-ft. standard length and up to 15-ft. reach** when using its extension pole allows it to cut tall branches and shrubs. The pole saw is durable and provides a comfortable feel for the user.

The 20V MAX* Pole Saw features a durable metal bucking strip that helps grip the wood and a tree hook that can grab and remove pruned branches. Its efficient brushless motor achieves up to 96 cuts per charge on a 4×4-inch pressure treated pine wood using a 4.0Ah battery. The saw’s 8-inch bar offers low kickback and fast completion of cutting limbs up to 16 inches wide. The pole saw is also compatible with a 10-inch bar and chain that aligns with the proper gauge and pitch for this unit. In addition, the 20V MAX* Pole Saw offers automatic chain oiling and features a rubberized grip for a variety of gripping angles.

pole saw

At only 8.44-lbs. (tool only), the 20V MAX* Pole Saw is lightweight and compact. Ease-of-use features include the saw’s side exhaust, and an angled head with the blade mounted on the left side. This provides a clear line of sight and leverage while cutting. Available where DEWALT products are sold this summer, the 20V MAX* Pole Saw will come kitted with one 4.0Ah Battery for $199 MSRP (DCPS620M1) or bare (without a battery) for $149 MSRP (DCPS620B). The 20V MAX* Pole Saw will come with a three-year limited warranty, one-year free service contract, and a 30-day money back guarantee.

* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

** Based on a 6.0 ft. person holding the pole in a straightened position at shoulder level, 60 degrees from the ground.

The post DEWALT Announces the New 20V MAX Pole Saw appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2MplXZ3
via IFTTT

Friday 26 July 2019

Greenworks Makes Additions to 82V String Trimmer Line-up

string trimmer

Greenworks Commercial, leaders in battery-powered outdoor equipment for landscaping, turf management, sports facility and municipality maintenance professionals, has introduced 3 new additions to its award-winning 82-volt string trimmer product lineup. The addition of the new 82T16 Brushless Front Motor String Trimmer, the 82TB16 Brushless Bike Handle String Trimmer and the 82TB18 Brushless Bike Handle String Trimmer allows Greenworks to now offer more lithium-ion battery powered string trimmer solutions for pros than any other OPE brand, delivering a new level of customization and cost savings to the dealer channel.

string trimmer

On the heels of its buzzworthy GT 161 Attachment Capable String Trimmer launch earlier this year, Greenworks is unveiling two bike handle string trimmers and a 16” traditional loop handle string trimmer, front motor design to give landscape pros 5 heavy-duty tools to choose from for their trimming needs. The 16” and 18” bike handle trimmers use an ergonomic-friendly design for max comfort and utility in mind, allowing professionals to tear through a large area of property with superior maneuverability and less stress on the arms.  The balance and directional “steering” make both the 82TB16 and 82TB18 ideally suited for tackling tall grasses and weeds in larger open fields and common areas.   For stubborn weeds and brush, both the 82TB16 and 82TB18 come standard with a Brush Cutter blade, as well. For trimming in tighter spaces, the new front motor 16” loop handle trimmer is created for optimum power and precision. The 82T16 uses its front motor design to deliver energy directly to the cutting head without having to transfer through the shaft, making it a powerful option for smaller space trimming.

“As lithium-ion powered trimmers become a ‘must-have’ part of landscape crews’ daily tool arsenals, we wanted to offer more highly-customized options that can tackle a wide array of jobs and meet all the varied ergonomic preferences of crew members,” said Tony Marchese, commercial business unit leader for Greenworks America. “With our two new bike handle trimmers, the 82TB16 and the 82TB18, and our new loop handle front motor trimmer, the 82T16, we are proud to now offer landscape pros more lithium-ion powered trimming options than they’ve ever had before, allowing them greater ability to tailor their tools to specific jobs and preferences.”

Powered exclusively by the company’s revolutionary 82V lithium-ion battery, all of Greenworks Commercial’s trimmers guarantee that landscape professionals can get even the most rigorous of trimming jobs completed with time and cost efficiency.  In addition, the elimination of harmful fuel emissions and the significant reduction in noise pollution that comes from using lithium-ion powered OPE creates a safer, healthier and more pleasant work experience for users.

The new Greenworks Commercial 82T16 Brushless Front Motor String Trimmer, the 82TB16 Brushless Bike Handle String Trimmer and the 82TB18 Brushless Bike Handle String Trimmer are available now through the Carswell, Carswell OEI, PACE and Steven Willand independent dealer networks. The 82T16 is priced at $250.00, the 82TB16 is priced at $365.00 and the 82TB18 is priced at $389.00. Each tool comes with a two-year warranty.

For more information on the 82T16 Brushless Front Motor String Trimmer, the 82TB16 Brushless Bike Handle String Trimmer, the 82TB18 Brushless Bike Handle String Trimmer and Greenworks Commercial’s comprehensive selection of best-in-class, battery-powered outdoor equipment, visit the new http://greenworkscommercial.com.

The post Greenworks Makes Additions to 82V String Trimmer Line-up appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2OkGn88
via IFTTT

Thursday 25 July 2019

Making The Most Of Software

landscape business software

As a landscape business owner, you’re probably always looking for tools and processes to help you run your business better. More specifically, you’re in search of ways to improve efficiency and productivity in order to boost the bottom line. For those who have implemented it, one tool for running a better business has been landscape business software.

landscape business software

(Photo: Getty Images)

“In general, software is a valuable tool to help you be able to look at data and make better decisions about your business,” says Hank Wilson, CEO of SunScape Landscaping in the Austin, TX area. “We use software in a lot of different ways including closer scrutiny of sales activity, estimating, production, and job costing.”

Wilson uses Aspire Software and credits it for helping his business take the leap from an $800,000 business to $6 million operation. He says that being able to know how all jobs were performing—including analyzing budgeted versus actual hours—is what helped him make wise decisions over the years. If a job got off track, corrections could be made before money was lost. That has led to increased profitability.

For Julie McHale, controller for McHale Landscape Design, a $20 million full-service landscape and maintenance company headquartered in Upper Marlboro, MD, the benefits have been similar. McHale, who uses Asset from Include Software, says that software has always been an essential tool to the company’s overall success. In fact, McHale was using a simple software program back in 1981 (when the company got its start)—a time when many landscape businesses didn’t even have computers. But that was a basic accounting program.

McHale says that switching to a tool as powerful as Asset has been a gamechanger. Tracking jobs and paying close attention to budgeted versus actual hours has been incredibly helpful in making decisions to help keep the company profitable, she says. She has also been able to utilize Asset to complete payroll—a task that was cumbersome using Excel spreadsheets.

The Value Of Real-Time Data

Like Wilson at SunScape Landscaping, McHale says that software provides the capability to track jobs and get updates in real-time. In fact, it’s even been instrumental in allowing McHale Landscape Design to create a gross margin bonus plan for crew leaders. When employees are able to increase the gross margin, the company has pledged to share some of the profits with them. Without real-time tracking of how jobs are performing, this incentive would not work.

Michael Kravitsky IV, owner and president of Grasshopper Lawns, Inc. in Larksville, PA, agrees that real-time data has been very important. Kravitsky, who uses Real Green Systems’ Service Assistant, says that the GPS tracking capabilities of this software—which allow him to see where his trucks are and what work is getting done—have been incredibly helpful.

“I can go to the mapping and see the jobs that any given truck has already done, what roads they have traveled on, and in what order the jobs were done,” Kravitsky says. “If it’s done differently than the way we routed it that morning, we can inquire why. That’s made us much more efficient at routing.”

Given the company’s rural area and the fact that routing mistakes can be a huge profit killer, Kravitsky says that this feature has prevented costly errors.

“We put our jobs in the most efficient order and we want to make sure they’re performed that way,” he says. “Throughout the day we will check in, using the software. If we see that a crew member bypassed a job—particularly one that’s far away from any other jobs—we’ll call right away to make sure it’s completed. The last thing we want is for them to drive all the way back here and have to run back out to a single job, not located near any others.”

Expect An Investment

While landscape business software can be a powerful tool to improve multiple aspects of a business, it’s important to remember that it takes some work in order to bring about success. Implementing software is not a simple process but those who have been through it say it’s worth it.

“In order to get the most out of software, you have to commit to it becoming part of your culture and using it to its full capacity,” Wilson says. “It requires work—inputting a lot of data to be able to get the data out of it that you want to analyze.”

Nanette Seven, vice president of Include Software, says that in computer science, there’s an expression: “garbage in, garbage out.” In other words, incorrect or poor-quality data input will produce faulty output. Seven says in order for software to be able to do its job, users have to invest the time and energy to set the system up to work for their needs.

“It’s a time investment, but it will pay off for you if you’re willing to commit,” she says. “However, no software program is going to be able to fix bad systems and processes. If you don’t have the processes in place, then that’s the best place to start before you consider adding software.”

Wilson agrees. “Software is not a magic bullet that is going to fix all of your company’s problems,” he says. “But if you use it the way you should, it can absolutely help support and even improve your business. It helps us make decisions faster—and better—and it’s made our business run smoother overall. But it took time to get here. View it as an investment. You have to put time, energy, and resources into it—but the output is worth it.”

landscape business softwareGetz is an award-winning freelance writer based in Royersford, PA. She is a frequent contributor to Turf magazine.

Do you have a comment on this topic? Share your thoughts in the Comments section below or send an e-mail to the Editor at acosgrove@groupc.com.

The post Making The Most Of Software appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2Me5bw4
via IFTTT

New Yard Work Tool Launched by Grab-All Company

yard work

Grab-All Company is a new start-up that developed a manual yard work tool (Grab-All) that saves time and effort when gathering and grabbing bulky debris – yard trimmings and debris.

The commercial grade Grab-All tool allows you to easily gather, grab and pick-up BULKY debris at an upright position without straining the body – back, neck, and knees.

yard work

A well-maintained yard is very gratifying and provides a sense of pride, however, most people drag

their feet when it comes to doing it. According to an article on the “HomeAdvisor” Website, the average

single-family-home yard size in the United States is 10,871 square feet. Moreover, according to an article

by Habitat Network, the average single-family home has 77% of vegetation, i.e., trees, shrubs, grass, etc.

Those numbers imply that the average American home owner maintains an average of 8,370 square feet of yard!

“The Grab-All will advance the way we do yard work – working smarter not harder,” said Hector Avila,

founder and CEO of the Grab-All Company.  When Avila designed the Grab-All, he wanted to develop

a tool not only to improve the way people manually handle and dispose of yard waste and debris, but also

a tool that consumed zero emissions. Furthermore, Avila developed the “Grab-All Shoving Technique,”

that easily and quickly shoves/gathers large piles of debris, reducing the use of polluting emission tools

such as leaf blowers, etc.

The post New Yard Work Tool Launched by Grab-All Company appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2OkrLFY
via IFTTT

Wednesday 24 July 2019

Miralon, A New Agrihood

Miralon, Agrihood

In Palm Springs, CA, a developer is building the next agrihood in the desert. Olive trees and pockets of citrus trees are a centerpiece.

Miralon, Agrihood

(Photo: Joe Lyman)

The Urban Land Institute (ULI) defines agrihoods as single-family, multifamily, or mixed-use communities built with a working farm or community garden as a focus. In the Coachella Valley, Freehold Communities is building a new agrihood on 97 acres. 

Brad Shuckhart is President of the California Division of Freehold Communities. Here is an overview of the project.


Overview of Miralon, the newest agrihood planned for the Palm Springs, CA area…

Miralon is one of the largest new “agrihoods” in the United States. Now being built by Freehold Communities, its 309 acres will offer 1,150 Modernist-inspired residences to harmonize with the Coachella Valley’s architectural heritage. Freehold Communities is a developer of masterplanned communities, with offices in California, Massachusetts, Texas, Tennessee, North Carolina, and Florida.

Miralon, Agrihood

The Miralon development is set on 97 acres in Palm Springs CA. The agrihood will feature more than 1,000 residences. (Photo: Freehold Communities)

A highlight of Miralon is its transformation of an existing (yet, never played) 18-hole golf course into working olive and citrus groves, community gardens, and walking trails. Paths meant to serve as golf cart paths previously will now constitute approximately 6.5 miles of hiking trails. Former tee boxes and greens are being transformed into smaller groves, dog parks, exercise stations, and social areas with firepits and WiFi. The former golf course’s lakes are now water features in the sustainable landscaping. These outdoor spaces are part of Miralon’s comprehensive community plan that emphasizes resort living alongside sustainable open space.

“Evolving the existing golf course into habitat-sensitive, olive and citrus is a response to the precious resources of the Coachella Valley including its need for water,” said Freehold California Division President, Brad Shuckhart. “We considered a wide range of uses, concluding that these crops integrate best with the community’s overall approach that values sustainability and social cohesion.”

Core Principles Components of Miralon…

Miralon’s agrihood component is part of its core sustainable principles, while can be grouped into the following categories.

Resource Conservation and EfficiencyMiralon, Agrihood

  • Solar included with every home
  • High-efficiency community center exceeding the state of California Title 24 requirements by more than 15%
  • Impervious surface limitations
  • Front yard landscaping restrictions
  • Dark sky compliance

Sustainability

  • Carbon sequestration from olive trees and ground cover
  • Added shade and water efficiency
  • Low maintenance costs relative to other open space planting
  • Reduced need for pesticides
  • Composting of olive oil byproducts
    Miralon, Agrihood

    (Top) Mature olive trees line a roadway in Miralon. (Bottom) This rendering illustrates the transformation of the golf course into the spaces for olive groves, gardens, and trails. (Photos: (Top) Freehold Communities; (Bottom) Rendering courtesy Robert Hidey Architects)

Other core principles of the development focus on a holistic approach to healthy living, and community involvement.

Choosing Olive Trees, And Pockets Of Citrus…

Pursing its vision for Miralon, Freehold Communities enlisted the help of sustainable agriculture specialists to optimize the proposed planting scheme. The developer worked with Blaine Carian, owner of Desert Fresh, a multi-generational farming concern with operations throughout the Coachella Valley; and with Thom Curry, general manager of the Temecula Olive Oil Company, an organic producer of high end olive oil and olive oil products

In planning the olive and citrus trees at Miralon, Shuckhart, consulted with Carian and Curry to evaluate orchard planning criteria, and these included:

  • Annual water consumption
  • Pesticide requirements
  • Ability of plants to survive at project location
  • Harvest labor requirements
  • Commercial demand for fruit/produce
  • Propensity to attract pests

In addition to olives and citrus, the team also considered grapes, persimmons, pomegranates, date palms, almonds, walnuts, and figs for the site. They evaluated the pros and cons or each type of crop and their suitability for the desert climate and ecosystem of the Coachella Valley.

Grapes, for example, require relatively low water use and a relatively short pollination period. But grapes are also susceptible to damage from wind, require significant ongoing maintenance, and require regular use of pesticides. Date Palms are a traditional crop in the Coachella Valley. But these also had drawbacks in comparison to olives and citrus, including that they require very high water consumption and can produce significant waste byproduct and dust.

The vast majority of Miralon’s cultivation area—more than 70 acres of the 97-acre open-space plan—is devoted to olives, with “pockets” of citrus throughout the community. Fruit from olive trees will be pressed on-site by Temecula Olive Oil Company. The oil will be bottled and delivered to residents and sold to the public.

Other Sustainable Components

The reuse of Miralon land offers other, complementary environmental programs, especially water and energy conservation. These include the transformation of the former golf course lakes for irrigation. The system of lakes serve several important functions:

  • Open space irrigation using untreated water
  • Water reserves capacity to sustain plantings for approximately three weeks in the event of a failure of the on-site pumps or well
  • Stormwater detention as required by State mandates

And while there is evaporation loss from lakes, Miralon has built compensating offsets:

  • Elimination of front-yard turf is analogous to reducing lake surface area by 2.5 acres (40% of total six-acre lake surface area).
  • The orchards will act as a windbreak and will create partial shade opportunities that will slow the rate of evaporation from lakes.

To learn more about the Miralon development, visit the Freehold Communities website.

Do you have a comment? Share your thoughts in the Comments section below or send an e-mail to the Editor at acosgrove@groupc.com.

The post Miralon, A New Agrihood appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2OhRChW
via IFTTT

Tuesday 23 July 2019

Reviving A River With Landscape Design

Landscape Design

There’s something about moose being one of the bigger challenges of a project that signals this isn’t an average landscape job. And, the Blue River Habit and Restoration project carried out in 2017 in Colorado certainly was not ordinary.

Landscape Design

A sitting area on the banks of the Blue River in Colorado features river rocks underfoot. (Photos: Rocky Mountain Custom Landscapes, Inc.)

Skiers likely recognize Breckenridge, CO for its world-class peaks, but what the snow covers in the winter doesn’t necessarily look quite as glorious come spring. Located just west of the Continental Divide, this area was originally settled by miners who stripped the land and left piles of rocky waste in their path. Work has been ongoing for more than two decades to clean up the rubble and improve fishing along the Blue River, which drains the area and provides drinking water for the Denver metro area.

In fact, the 2017 version of the river restoration project earned a silver award for the Eagle, CO office of Rocky Mountain Custom Landscapes, Inc. This award was part of the 2018 Awards of Excellence (ACE) for the National Association of Landscape Professionals (NALP).

Brian Wells, Rocky Mountain Custom Landscapes’ construction manager for that segment of the project, says the goal was to create a natural park setting where people can hike along the Blue River north of the Breckenridge central business area and restore a stretch of the river along Coyne Valley Road and Colorado Highway 9.

“We were recommended by (Denver-based) DHM Design, who did the overall design,” says Wells. “We had done some work with them over in the Aspen area. It was a bid process, and there was a total of three bids, but we were awarded the contract.”

Wells adds that weekly meetings between Stephen Ellsperman and Jason Jaynes of DHM and Shannon Smith, who oversaw the project for the Town of Breckenridge, contributed to a very cohesive team that was instrumental in the success of the project.

Hardscape Presents Sitting Areas

Hardscape work consisted of three sitting areas with a path going through the project area, and then work on the river itself.

“The path is granite crusher fines—just pulverized granite,” says Wells. “It’s roughly three feet wide and we put it in four inches deep and did some real loose compaction. The idea is the path will erode and go into the ground as people and wildlife choose their own way. But, honestly, that’s going to be years down the road.”

The sitting areas themselves are also a bit atypical. These are embedded cobble areas that are completely permeable. For this project the company utilized river rock from 3″ to 5″ in size—including some from the job site—in a sand-set base.

“It took a bit of experimenting with the rock size so that it compacted right and felt right under your feet,” he says. “It’s a matter of getting the subgrade correct, but once we got that in there and compacted with the sand and fill material, it’s rock solid and looks great.”

The look and performance so far have been good enough that Rocky Mountain Custom Landscapes is now incorporating the embedded cobble hardscape in work for some of its higher-end residential clients as an alternative to flagstone patios.

“You can install it and forget it,” observes Wells. “It maintains itself; it looks fantastic, and the payoff per dollar is extremely high.”

Landscape Design

Attracting wildlife to the restored area has been one of the project goals. Moose, elk, and deer have been increasingly seen in the area. Meanwhile, this stretch of the Blue River is an aesthetically and functionally pleasing area for people to enjoy as well. (Photos: Rocky Mountain Custom Landscapes, Inc.)

River Banks And Plantings

Work on the river involved grading, excavation, and backfill, although Wells says part of the stretch included areas that are designated as wetlands that were not disturbed.

“We did erosion control along the river itself with wetland plantings and fiber mesh along the edges,” he explains. “We also placed boulders and some deadfall logs to give habitat for the fish because they really want to encourage fly-fishing.”

Because of the condition of the river through the project site, efforts on one bank were made to save plant material and blend it with new plantings. However, the other side had been strip-mined and was barren.

All the plantings are native to the area but required additional effort on the part of Rocky Mountain Custom Landscapes to make them work.

“A lot of it was absolutely rock soil, which had to be top-dressed,” Wells says. “We had 3″ to 4″ of soil that was top-dressed in a lot of the areas.”

While a lot of the plantings were immature, the project did incorporate some evergreens in the eight-foot range.

Somewhat surprisingly, the project area also includes a 24-zone irrigation system that delivers 55 gallons-per-minute. Wells explains the decision to irrigate was based on 2017 being at the tail end of a drought in the area. There was the desire to get what he describes as a substantial amount of seeding on top of the plant material to germinate, as well as maintain the trees and plant material the next time a drought occurs.

“In 2017 we watered it pretty heavily, but toward the end of that season we started scaling back,” he says. “Last season we had it down to two days a week, and we’ll see how it goes this year based on snow and moisture. I’d anticipate maybe two days a week, although it took off and established pretty well.”

Protecting Plants, And Moose

More than drought conditions impacted the project. At 9,600 feet in elevation, Breckenridge has a short construction season.

“The weather was a bit challenging, both at the start and the end of our seasons,” says Wells. “The weather was a huge challenge getting going in the spring and then trying to wrap up the job.”

As it was Rocky Mountain Custom Landscapes spent four months on the site in 2017 and an additional two months in 2018.

It’s the plantings that ultimately created one of the biggest challenges on the project, though. Wells says the moose, elk, and deer who use the area and will eventually help create the paths through it, viewed the new greenery as—in his words—“gourmet salad,” and figuring out how to keep the plantings in the ground generated some head-scratching.

Landscape Design

Work on a segment of the Blue River included grading, excavation, and backfill. Part of the stretch included areas designated as wetlands that were not to be disturbed. (Photos: Rocky Mountain Custom Landscapes, Inc.)

“We used some natural-type sprays,” he says. “In a lot of cases, the only thing that would work was temporary metal screening around the bigger trees.”

All the screening will ultimately be removed, but for now, it remains until things get better established. And, Wells says the animal incursions are a mark of success for the job.

“The whole goal of the project is to attract the wildlife,” he says. “We want them to use the area, along with people, so it’s really ‘mission accomplished’ if they’re coming already.”

In the meantime, Rocky Mountain Custom Landscapes is still at work on the Blue River. Wells says the company spent part of summer 2018 further south on the little river incorporating a lot of the same plant and hardscape materials and they were back on that site once the weather allowed, with a completion goal around Independence Day this year.

Schipper is a writer and editor specializing in B2B publishing. She is a partner in Word Mechanics, based in Palm Springs, CA.

Do you have a comment? Share your thoughts in the Comments section below or send an e-mail to the Editor at acosgrove@groupc.com.

The post Reviving A River With Landscape Design appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2Y0d3Iv
via IFTTT

Late Summer Tree Care

trees

By Tchukki Andersen, BCMA, CTSP

Late summer is a good time to look for potential problems in your customers’ landscapes. Early leaf color changes or drop, galls on external tree tissues, and caterpillar webs are three of the possible things that may be affecting your customers’ trees and shrubs. But before you start up the chainsaw and chipper in despair, recognize that not all stress symptoms are a death sentence for the plant.

trees

To effectively counter early leaf stress symptoms, first identify the species of the tree in question. (Credit: Getty Images)

Early Leaf Color Changes. We look forward to a good fall foliage color display in October and November, but what if those colors appear early—in August or September? Premature color change can be an indication that a tree is lacking the vigor to withstand insects and disease organisms that may attack it—or there could be environmental imbalances as well.

Heat, drought, and drying winds affect trees, causing leaf color changes as a response to stress. Are there only one or two branches affected? This could be a sign of a disease at work, especially if the affected leaves also have dark spots or are discolored. The more common situation is for the entire tree to exhibit premature fall coloration, a phenomenon usually linked to root-related stress. And to complicate the diagnostic process further, there are several tree species genetically programmed to go dormant during hot summer months and drop browning, curled leaves in response to heat stress.

trees

Galls are raised growths usually caused by insects and mites. (Credit: Roger Griffith via Wikipedia)

The best way to counter early leaf stress symptoms is to know which tree species you are working with. Are those curled, brown leaves on a hackberry that normally goes dormant in the summer? Or are they on a dogwood that just needs a good soaking of water to revive its flagging leaves? Knowing the tree species will help you to provide the specific care they need year-round.

Galls. Another visible tree/plant symptom that might cause concern are galls. These are abnormal, raised growths usually caused by insects and mites, and can appear on leaves, twigs, or branches of trees and shrubs (see inset photo above). These plant structures may be plain brown or brightly colored, and can become more apparent as they age throughout the summer. Depending on the insect inhabiting them, the galls may be empty by the time August arrives—or adult insects may just be emerging in late summer. These adults and the galls themselves are usually harmless, so no active management is required.

Caterpillar Tents. Another late summer tree pest is the fall webworm (Hyphantria cunea). This pest is a moth in its adult stage but is primarily known for its larval stage, which creates the characteristic webbed nests on the limbs of a wide variety of host trees such as cherry, willow, and American elm. These tents may defoliate a tree occasionally, but rarely kill it. On shade trees, webs usually occur on only a few branches. While the tents are aesthetically startling, this pest is not believed to harm healthy trees. The fall webworm has natural enemies, including birds and insect predators, that help to manage its numbers. Mechanical controls may provide an immediate visual relief, if desired. Webbed branches within reach can be pruned and destroyed. This may be practical if the webs are not too large, and if the aesthetic shape of the woody ornamental plant is not reduced by pruning.

There are management controls, such as dormant oil, that can be applied to newly hatched webworm eggs in the spring. (From Wikipedia: Dormant oil is used on woody plants during the dormant season. This term originally referred to heavier weight, less well-refined oils that were unsafe to use on plants after they broke dormancy. These older oils have been replaced with more refined, lightweight oils that have potential application to plant foliage. Dormant oil now refers to time of application rather than to any characteristic type of oil.)

Healthy trees are quite resilient to late summer stresses. Add regular irrigation to your management protocols and your customers’ trees will be able to defend themselves well into the fall.

Andersen is a Board Certified Master Arborist, Certified Treecare Safety Professional, and the staff arborist at the TreeCare Industry Association, a Manchester, NH-based trade association of 2,300 tree care firms and affiliated companies established in 1938 as the National Arborist Association.

Do you have a comment? Share your thoughts in the Comments section below or send an e-mail to the Editor at acosgrove@groupc.com.

The post Late Summer Tree Care appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2JXoEOS
via IFTTT

BOSS Snowplow Introduces Redesigned Snowrator

snowplow

 

BOSS Products, a division of The Toro Company, acquired the Snowrator® brand in March 2018 and set about a redesign to take the one-of-a-kind product from good to great. Using its more than 30 years of experience in snowplow design, BOSS re-engineered the Snowrator to maximize the performance and reliability of this multi-tasking, labor-saving solution for snow and ice contractors.snowplowThe Snowrator quickly deploys to plow and de-ice sidewalks and walkways — effectively reducing the need for shovelers and allowing the operator to brine, spread and plow at the same time to maximize on-the-job productivity and profitability. BOSS-engineered improvements include a 4′ hydraulic snowplow with 20″ polyethylene skin and improved electrical and plow attachment systems. The Snowrator also now accepts all BOSS ATV plow accessories and common parts for better parts availability and convenience of service.

“At BOSS, it’s our business to make snow and ice management more efficient and profitable,” said Mark Klossner, marketing vice president for BOSS Snowplow. “Our customers can rely on the redesigned Snowrator to provide clean and clear sidewalks for metro, commercial and residential jobs, and Snowrators don’t call in sick or need time off. It’s a dependable labor solution in tough winter weather.”

BOSS-designed features and improvements: 

Plow

  • Has a 4′ BOSS hydraulic snowplow with a 20″ tall poly skin blade.
  • Shares all accessories and common parts with BOSS ATV plows for better parts availability and convenience of service.

Vehicle 

  • BOSS chassis provides greater protection from puncture to the standard brine tank and features a new, removable rear plate for easier maintenance and access to the tank.
  • Rear fenders and splashguards help to protect the operator from slush, salt, snow and other debris, for operator comfort.
  • Vehicle hardware now features nylon locking nuts to prevent loosening due to vehicle operation, for improved reliability.

Electrical

  • Electrical system now features weather-resistant connectors to improve reliability.
  • Hydraulic hose ends now feature a coating with 7x greater corrosion resistance.
  • Joystick hydraulic manifold is now painted to reduce corrosion.
  • Terminal block replaced with a power/ground harness to reduce corrosion to the electrical system and allow for plug-and-play with optional equipment.
  • Increased gauge of power and ground cable improve performance.

Controls

  • Responsive hydraulic lever turn control operations offer ease of maneuverability with zero turn radius and four-wheel drive for traction in any conditions.
  • Rear reference bar makes operation easier by giving the operator an additional hand-hold support feature.
  • Front reference bar is now notched to prevent the bar from slipping and offer a method of limiting vehicle speed.
  • LED worklights provide clear visibility on the job.

Ice Control and Optional Spreading Equipment

  • Snowrator features both pre-treatment and de-icing capabilities with a standard 20-gallon pre-treatment brine system, available optional auxiliary brine tank and two de-icing solid material spreaders.
  • Updated fully potted broadcast spreader controller provides onboard diagnostics for troubleshooting and eases operation.
  • EXACT PATH® 1.5 cubic foot drop spreader with a BOSS-exclusive salt chute precisely distributes salt at the optimum width and pattern, minimizing damage to turf while reducing salt contact with the plow attachment system.

Available accessories for the Snowrator include a 20-gallon auxiliary tank, plow wing extensions, material carrying trays, broadcast spreader, plow box wings, shovel mounting brackets, EXACT PATH drop spreader, urethane cutting edge and 5-gallon bucket mounts. 

The post BOSS Snowplow Introduces Redesigned Snowrator appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2JVMt9L
via IFTTT

Friday 19 July 2019

The Bloom Is Back On The Tupperware Rose

tea rose

At its corporate campus in Kissimmee, FL, Tupperware® has revitalized its signature hybrid tea rose. BrightView Landscapes created two rose gardens on the company’s grounds with the help of local experts.

Landscaping is often an attempt to improve on Mother Nature’s best. But, sometimes, it can also become a matter of preservation. That’s the position Tim Harris, a regional designer/project estimator for the Orlando, FL office of BrightView Landscapes, found himself in when he was called on to design two new rose gardens for the world headquarters of Tupperware®.

Faced with the near-extinction of its Tupperware hybrid tea rose, the company opted to rebuild its rose stock from five remaining plants. BrightView, which holds the maintenance contract for the corporate campus in Kissimmee, FL, was brought in to design and build the new rose gardens to showcase a portion of the revitalized roses.

tea rose

South Garden at Tupperware headquarters in Florida

“Roses” and “Tupperware” have always been synonymous. The company vice president who developed the idea of the Tupperware sales party first commissioned a hybrid rose in 1953. Its design and color were reflected in the company’s products and use of color for many years.

Over time, the company and its leadership changed, and in 1981 a new Tupperware hybrid tea rose, with many of the same characteristics including a brilliant dark pink color and rich fragrance, was developed by rosarian J. Benjamin Williams and registered with the Library of Congress.

With its rose species, Tupperware has been careful to control the stock, planting it on its campus exclusively. So, when it became apparent in 2014 that there were only the five remaining plants, the company sprang into action, hiring rosarian Wendell Ulmer, owner of HeavenSent LLC in Apopka, FL, who suggested the roses could be repropagated.

BrightView’s Harris explains that the existing rose plants were dug out and taken to O.F. Nelson & Sons Nursery/Nelsons Florida Roses, also in Apopka. The company is known for bringing roses to the Sunshine State.

“They have a patent on a special root stock called Fortuniana that’s nematode-resistant,” Harris explains. “They took cuttings off the plants, rooted them, and then grafted them onto the Fortuniana rootstock. They were able to replicate from those remaining plants approximately 300 Tupperware roses.”

Two Rose Gardens Brought To Life

It was at that point that Harris was brought in to design two roses gardens, a North Garden and a South Garden. The project won a 2018 silver Award of Excellence for a design/build project of $25,000-$100,000 from the National Association of Landscape Professionals  (NALP).

He explains that the size of the Tupperware headquarters building is such that a garden at either end would make it more convenient for employees and visitors to enjoy the roses.

“They also have two ponds on either end of the building, so it balances it out,” he says.

However, the two gardens, each approximately 40’x 80′, are not identical. The North Garden is laid out in the shape of the letter “H” and includes four benches and a 16′ x 10′ pergola for shade, while the South Garden has a single walkway and three benches.

Part of the difference is due to the presence of trees at the two sites. While a Weeping Willow was left as part of the South Garden, a Tabebuia on the site of the North Garden was relocated just to the north of that garden and closer to the pond.

Harris is particularly proud that the tree was able to be successfully relocated.

“We used a tree spade, and it didn’t even go through any transplant shock,” he says. “It didn’t drop a leaf.”

Other than moving the Tabebuia tree, site preparation for the two gardens was simple. “Each area was just sod, which we cut and removed,” Harris says. “It was also pure, clean, and weed-free, so we didn’t have to do any chemical weed treatment.”

Hardscape for the project included paver walkways and freestanding wall blocks columns with caps to support a gate for each garden.

tea rose tea rose

“We went with the pavers for aesthetic reasons,” says Harris. “We didn’t want to pour an impervious surface, and these are ADA- (Americans with Disabilities Act) compliant. It’s very simple construction.”

Because of its location in a former swamp, the water table at the site is fairly high. Rosarian Ulmer created a special soil mix for the gardens which was used both for planting the roses — which Ulmer handled — and to raise the grade of the entire garden slightly to promote natural drainage.

At the same time, some irrigation was required for the roses.

“We did spray-stake irrigation, which is a low-volume irrigation,” Harris says. “Each rose has its own spray-stake spraying water at the bottom of the plant, so the foliage doesn’t get wet and promote powdery mildew or black spot.”

While the roses — approximately 160 of them split between the two gardens (the unused roses are held in containers in a specially built nursery holding facility and may go into another rose garden at a later date) — may have made a straightforward move to their new locations, not all the plantings were as accommodating.

tea rose

Tupperware commissioned a local artist to make the metal benches for the two gardens. The benches are designed to mimic the company’s logo. Shown here is the North Garden.

The roses, which are planted 4′ apart, were to be set off with Majestic Beauty® Indian Hawthorn shrubs, which were to be used as topiary in the gardens. However, they became what Harris refers to as “quite an issue.”

“We procured them at a nursery that had field-grown them,” he explains. “We planted them after they had been freshly harvested, and they went through severe transplant shock. We lost all but two of them, and a lot of time and energy and money was spent.”

Instead of replacing like-for-like, Harris then opted to go with container-grown Feijoa (also known as Pineapple Guava), which can be maintained into a globular canopy structure.

The other piece of the plant palette for the project also presented a challenge. Harris says one of the main parts of his design dealt with controlling the deer which populate the woods around the Tupperware campus, and just love to eat roses.

His solution: a 5′ tall fence with metal posts and a green vinyl-coated material of rectangles measuring 2″ X 4″, which was then heavily planted with Podocarpus.

tea rose

The deer-barrier fence installed in the South Garden.

“The Podocarpus is growing through the fence so the garden is very hard to see,” Harris says. “In fact, we had a $4,000 change order on that part of the job because the client’s landscape superintendent, Bill Pearson (who supervised the job for Tupperware) wanted them planted so tightly we had to buy more Podocarpus and plant it so the root balls were touching. We didn’t even dig individual holes.”

As finishing touches on the project, Tupperware had two gates specially made that mimic the gate at the campus’s original rose garden and commissioned a local artist/sculptor to make the metal benches for the two gardens.

The benches are designed to pick up the on the Tupperware logo, and on a large fountain in the building’s main entrance. Harris says the benches have become one of his favorite features with the project.

Harris estimates he spent about 140 hours designing the project, with a four-man BrightView crew and rosarian Ulmer spending another 350 man-hours to make it a reality.

Certainly, his experience with the Majestic Beauty Indian Hawthorns was the most challenging part of the job, and while the clients were happy with the job, Harris says if nothing else the project taught him to be firm when the need arises.

“They wanted the rose gardens in by a certain deadline, so we rushed to harvest those main topiary trees,” Harris says. “I wanted them harvested and then held to get through the transplant shock. We ended up taking them freshly harvested and they shocked on us severely after we installed them.

“I learned a valuable lesson and will never repeat that mistake,” he concludes, adding that overall the project was unique in its purpose, design coordination, and cooperation and should serve the Tupperware employees for years to come.

Schipper is a writer and editor specializing in B2B publishing. She is a partner in Word Mechanics, based in Palm Springs, CA.

The post The Bloom Is Back On The Tupperware Rose appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2Lx0ZrU
via IFTTT

Wright Mfg. Introduces a New Green Mulch Kit Add-On

mulch

Research has shown that it is better for lawns and the environment if clippings are dropped and left to decompose right on the lawn. Recently,  Wright Mfg. has made this easier for lawn care professionals to go green with a simple to install mulch kit.

The kit consists of special baffles and blades. Mulch kits are a great alternative to collecting clippings and leaves. The recirculating baffles and blades break clippings down into small, easily biodegradable pieces, and drop them to the ground. Since the clippings decompose quickly, they will not be noticeable from the house or the street.

This product is an add-on that is built to enhance productivity on a mower.

Wright mulch kits can be installed in minutes using only basic tools. After removing the standard baffles and blades,  the mulch baffles and block plate can be installed in minutes, followed by mulching blades.

The mulching kit can be found under accessories at www.wrightmfg.com. For the name of your nearest dealer, call 301.360.9810. Wright Mfg. is headquartered at 4600X Wedgewood Blvd., Frederick, MD 21703

mulch

 

The post Wright Mfg. Introduces a New Green Mulch Kit Add-On appeared first on Turf.



from RSSMix.com Mix ID 8230377 https://ift.tt/2Sn4i5s
via IFTTT

25 Simple Halloween Decoration Ideas For Your Landscape

Ghosts, witches and skeletons… oh my! Get your yard ready for the spookiest night of the year with these fun outdoor ideas.

In The Garden

Don’t have a garden? It’s not as hard as you think. Get yourself some dirt and mulch to get you started. For optimal results, we recommend the Garden Mix. If you need to fight some weeds while gardening, pick up some landscaping fabric

Pumpkin Patch

How To Do It: Place pumpkins in your garden to make it look like you have your own patch. Doing it this way avoids you actually having to plant and nurture your own pumpkins. You can get pumpkins from any local grocery store during the Halloween season. Check your local apple orchard as they often grow pumpkins as well.

pumpkin patch

 

Ghoulish Graveyard

How To Do It: Add gravestones, cobwebs, and skeletons to your garden to spook trick-or-treaters and house guests. 

halloween graveyard decor

 

Glowing Pavers

Paint stepping stones with glow-in-the-dark paint for an eerie curb appeal. If you want to take a more long-lasting approach, you can make your own stepping stones with glow-in-the-dark powder. The phosphorescent chemical recharges in the sunlight and can glow for anywhere from 30 minutes to 10 hours. 

What You Need:

  • Concrete mix
  • Stone mold
  • Glow-in-the-dark powder (with Earth Iluminate)

How To Do It: Add glow-in-the-dark powder to the concrete mix and make your stepping stones as normal. The recommended amount to use is about 15 percent powder to the concrete. 

 

Zombie Hands Coming From The Earth

How To Do It: Place plastic hands and other body parts in pots of dirt to make it look like they are growing. Standard black pulverized dirt will provide the most visually appealing yet affordable dirt for those zombie’s hands. 

A fun branch off of this idea is to serve cupcakes with the same theme. 

zombie cupcakes

 

On The Porch

Painted Pumpkins

How To Do It: If you’re short on time and don’t want to deal with the mess of carving a pumpkin, paint one instead. If you plan on handing out non-food items to trick-or-treaters, you can paint a pumpkin teal and place it on your step to signify to kids with food allergies or other conditions that they can come to your door.

painted pumpkins

 

Pumpkin Display  

What You Need:

  • Hay Bales
  • Wooden Crates
  • Pumpkins

How To Do It: Stack hay bales and crates to create a display for your porch or along the outside of your house. Fill your creation with pumpkins, plants and any other decor you can find. Feeling extra spooky? Add some lights or lanterns to the mix for when it gets dark. When it’s time to retire the decor, use the hay as makeshift mulch until spring rolls around.

 

Bloody Footprints

How To Do It: Step into washable red paint and walk up to your front door. For a greater effect, add some pretend bloody limbs by your walkway. Red lights and blacklights would be the icing on the cake for this gloomy walkway.

bloody walkway

 

Bubbling Witches Cauldron

What You Need: 

  • Cauldron
  • Hot Water
  • Dry Ice
  • Gloves / Tongs

How To Do It: 

  • Fill the cauldron halfway with hot water. 
    • To make bubbles, add some dishwashing soap. 
    • To give your “witches brew” a scent, add spices to the mixture. 
  • Add a few pieces of dry ice to create the smoking effect. You’ll want 10-15 pounds of dry ice total to keep your cauldron going all night long. You cannot touch dry ice with your bare hands, so make sure you handle it safely with gloves or tongs.

witches cauldron

 

Mummy Door

What You Need:

  • White Crepe Streamers
  • Black Construction Paper (1 sheet)
  • White Construction Paper (1 sheet)
  • Tape
  • Scissors

How To Do It: Start by wrapping the streamers around your door. When you’ve achieved the look you want, cut out two eyes from the construction paper and tape them to the door. 

zombie door

 

Poison Apples

How To Do It: Place a basket of “poison” apples next to your front door as an offering. This can be as easy as setting a basket of apples and a fake bottle of poison next to it. 

 

Welcome (Or Not) Mat

What You Need:

  • Old doormat or carpeting square
  • Paint

How To Do It: Paint a message on the doormat to dare visitors to enter. Use this along with other fun ideas on this blog post, such as the bloody walkway. If you prefer functionality and less work, a higher-end Halloween entry mat may be just what the doctor ordered.

 

Boarded Up Windows

How To Do It: Attach real or fake boards to your windows to make it look like your house has been abandoned. Or go the easy route and pick some premade ones up at Walmart for under $20.

window board decor

 

Potions

How To Do It: Decorate old jars and containers to look like potion bottles. 

potions

 

Scarecrow

What You Need:

  • Wood Planks (2)
  • Hammer & Nails
  • Small Bucket
  • Newspaper
  • Burlap
  • Twine
  • Clothing (we suggest an old flannel, overalls and a hat)
  • Straw (1 bale)
  • Black Sharpie Marker
  • Glue

How To Do It: 

  • Nail the wood planks together in a cross-shape.
  • Line the bucket with burlap and begin to fill it with wads of newspaper. Continue to do so until the bucket is packed tight with newspaper.
  • Place the end of the plank where your scarecrow’s head will be into the bucket of the newspaper.
  • Use twine to tie the burlap around the newspaper and top of the plank. This will be the scarecrow’s head.
  • Remove the bucket and turn your scarecrow upright.
  • Put the flannel on the scarecrow. Tie the ends of the sleeves and the bottom of the shirt with twine and fill it with straw.
  • Place the overalls on the form. Tie the ends of each leg with twine and fill them with straw.
  • Use the Sharpie to draw a face on the scarecrow’s head.
  • Glue the hat on top of your scarecrow.

 

Spider Webs

What You Need:

  • Clothesline (100 feet)
  • Ceiling Hooks (3)

How To Do It:

  • Attach the ceiling hooks to the top of your porch, about 1’ from each other.
  • String one length of clothesline from the middle ceiling hook and tie it to a porch railing.
  • String another length of clothesline horizontally across the first string, so they make a cross-shape. Tie a knot at the center point.
  • String two more lengths of clothesline from the remaining ceiling hooks and tie them to the railing diagonally, so they form an “X”.
  • Take the rest of the clothesline and tie one end to the center knot, then begin to tie knots as you circle around the center. Your web will begin to form.
  • Add a spider to your web if you would like.

 

Window Silhouettes

How To Do It: Use a stencil to trace silhouettes onto black construction paper. Cut them out and place them in your windows. 

 

Yard Decor

Pumpkin Planters

What You Need:

  • Pumpkin Treat Buckets
  • Dirt

How To Do It: Fill pumpkins with Garden Mix Dirt and whatever plants you want. While Target sells the weatherproof pumpkin planters, you can make a fun project out of it by carving out a pumpkin and doing it organically.

 

Lit Pathway

How To Do It: Line your walkway with small candles or lights (to stay on the safe side).

small candles

 

Mason Jar Luminaries

What You Need:

  • Mason Jars
  • Paint
  • Tea Candles (1 for each mason jar) or string lights

How To Do It: Paint your mason jars however you would like and place a tea candle or string lights in each. It’s dead simple. If you want inspiration, or just would prefer to buy premade ones, look on Etsy

mason jar luminaries

 

Glowing Ghost Luminaries

What You Need:

  • Empty Milk Gallons
  • Black Sharpie Marker
  • Tea Candles (1 for each milk gallon)

How To Do It: Draw a face on each milk gallon and place a tea light inside for a simple glowing ghost. 

ghost luminaries

 

Bonfire Pit

What You Need:

  • Concrete Pavers or Bricks
  • Crushed Gravel
  • Water
  • Construction Adhesive
  • Fire Pit Bowl

How To Do It:

  • Clear an area for the pit and dig down about 7”
  • Pour the pit just over halfway full with crushed gravel
  • Add a small amount of water and pack the gravel down
  • Lay the first row of concrete pavers around the edge of the pit, adding construction adhesive to each block
  • Add a second layer of pavers, staggering them from the first layer so that there are no gaps
  • Insert the fire pit bowl

bonfire

 

Hidden Treasure

How To Do It: Bury various prizes and treats in a sandbox and let the kids hunt for their treasure.

 

Quicksand Pit

What You Need:

  • Sandbox
  • Sand
  • Water

How To Do It: Fill the pit ⅔ of the way full with sand and fill the remaining ⅓ with water. 

 

Glow In The Dark Paint On Your Boulders

Boulders are a fun and quick way to show your neighborhood that your yard is a big deal. Getting them delivered is a breeze and it can quickly transform a flat terrain to a fun landscape. 

What You Need:

painted boulders

 

Skeleton In A Wheelbarrow

How To Do It: Fill a wheelbarrow with dirt and place skeleton bones in it, to look like a skeleton was dug up from the ground. You can use either screened sand (easier to work with) or black pulverized dirt (more economical) or come by and pick up some free tailings and screenings.

skeleton wheelbarrow

We’d love for you to drop by and pick up some of these products for yourself. But, if you’d rather have us bring them to you, we’d be happy to do that. Feel free to purchase and order your delivery online or visit us in person.

The post 25 Simple Halloween Decoration Ideas For Your Landscape appeared first on Frador.



from RSSMix.com Mix ID 8230377 https://ift.tt/2XMr6RU
via IFTTT